FAQ - Changing CAN Speed on The BTI 52mm Gauge

Created by Caleb Reedy, Modified on Thu, 6 Nov, 2025 at 1:37 PM by Caleb Reedy

The BTI CAN Gauge comes preconfigured with a 1 Mbps CAN speed. This works for most applications; however, there may be some situations where the speed needs to be changed if there are other devices on the CAN network that need to run at a different speed.

Steps to Change CAN Speed:

1. Hold down the right button.

2. Power on the device

3. Cycle through the first menu and select "ECUMaster"

4. Cycle through the second menu and select your desired CAN speed.

5. Finish cycling through the menus and select the options you want.

6. Cycle power and double check the new CAN speed has been applied.